標籤: RF0-001

RFID+ RF0-001考試考古題由“KillTest認證題庫網”資深IT認證講師和RFID+產品專家結合Prometric或VUE的真實考試環境最新原題精心打造。RF0-001考古題助您一次輕鬆通過考試。所售考古題含蓋了當前最新的真實考題，並且全部附有正確答案，我們承諾對RFID+ RF0-001(RFID+ Certification)考試原題完整覆蓋。如果您正在準備RF0-001考試，它將是最佳的學習助手，是您通過考試取得證照的捷徑。

RF0-001 Exam考古題由我們的資深IT認證講師和RFID+產品專家精心打造，包括了當前最新的真實RF0-001考試題目，全部附有正確答案。所有購買我們“RF0-001考古題”的客護，都將獲得60天免費昇級的售後服務，確保客護的壹次通過率。

1. A customer has an RFID system to sort packages by their destination in real time. When first installed,
the system worked properly but now most packages are not going to the correct destination. Which of the
following BEST describes the cause of this problem?
A.There are increased losses in the antenna cabling.
B.Interrogator output power has degraded over time.
C.Sensors that control the interrogator were repositioned.
D.The customer is using a bad batch of tags.
Answer: C

2. An animal identification system is used in feedlots and transfer gates are equipped with 135 kHz
interrogators and are of a size to support one animal. When two animals attempt to get through at the
same time, a problem occurs because the:
A.135 kHz systems do not have anticollision
algorithms.
B.135 kHz interrogator system is broken because of the congestion.
C.animals expand the gates to a size where the second animal cannot be read.
D.animals are moving too slowly to be read only once.
Answer: A

3. Pallets in a freezer are tagged with passive ultra high frequency (UHF) tags. The interrogator at the
loading dock has a high misread rate on pallets from the freezer. The MOST likely cause of the high
misread rate is that:
A.there is a higher temperature in the trailer.
B.there is condensation on the tags.
C.the tag and interrogator are at different temperatures.
D.the tag temperature is too low.
Answer: B

RFID+ RF0-001考試題庫由KillTest認證題庫網資深IT認證講師和RFID+產品專家結合PROMETRIC或VUE的真實RF0-001考試環境最新原題傾心打造。題庫覆蓋了當前最新的真實考題，並且全部附有正確答案，我們承諾題庫對RFID+ RF0-001(RFID+ Certification)考試原題完整覆蓋。RF0-001題庫助您輕鬆通過認證考試，一次不過全額退款。

RFID+ RF0-001(RFID+ Certification)考題由我們的資深IT認證講師和RFID+產品專家精心打造，包括了當前最新的真實RF0-001考題，全部附有正確答案。所有購買KillTest RF0-001 題庫的客戶都將得到60天的免費升級服務，保證了客戶的一次通過率。KillTest IT認證題庫網助您一次通過RFID+ RF0-001考試。RFID+ Certification(RF0-001 Exam)屬於RFID+認證考試中的一門，如果需要取得RFID+證書，您可能還需要參加其他相關考試，詳情可訪問RFID+認證專題，在那裡，你將看到所有RFID+認證相關考試科目。

1. A customer has an RFID system to sort packages by their destination in real time. When first installed, the system worked properly but now most packages are not going to the correct destination. Which of the following BEST describes the cause of this problem?
A.There are increased losses in the antenna cabling.
B.Interrogator output power has degraded over time.
C.Sensors that control the interrogator were repositioned.
D.The customer is using a bad batch of tags.
Answer: C

2. An animal identification system is used in feedlots and transfer gates are equipped with 135 kHz interrogators and are of a size to support one animal. When two animals attempt to get through at the same time, a problem occurs because the:
A.135 kHz systems do not have anti-collision algorithms.
B.135 kHz interrogator system is broken because of the congestion.
C.animals expand the gates to a size where the second animal cannot be read.
D.animals are moving too slowly to be read only once.
Answer: A

3. Pallets in a freezer are tagged with passive ultra high frequency (UHF) tags. The interrogator at the loading dock has a high misread rate on pallets from the freezer. The MOST likely cause of the high misread rate is that:
A.there is a higher temperature in the trailer.
B.there is condensation on the tags.
C.the tag and interrogator are at different temperatures.
D.the tag temperature is too low.
Answer: B